Opens mobile navigation.
The new OVX-6400 is a 6400VA 3-phase sine wave DC/AC inverter that meets EN612587-1 and EN50155 standards among others. The OVX-6400 is designed not only to work within the 400 to 900V input voltage range but also to withstand surges and over-voltages as described in EN50124-2.
The unit allows:
- Adjustable output frequency
- Adjustable output voltage
- Input voltage according to EN50163:2006 & EN50124-2:2017
- High input-output isolation 5400Vrms
- Remote off optocoupler
- Alarm by isolated relay contacts
- Configurable input: Reverse or Mid power
- Remote control via RS232
- CAN BUS
- Railway applications according to EN61287-1
- Fire and smoke: EN45545-2
The ODX-4500 three-phase sinusoidal DC/AC inverters series offers up to 4500VA. It has a soft start and is programmable via RS232. These inverters are ready to work under harsh conditions thanks to their robustness and reliability.
The unit allows:
- Sine wave output voltage
- Suitable for motors control
- Selectable output frequency: 50/60Hz
- Adjustable output voltage
- High input-output isolation 3000Vrms
- Remote inhibit
- Reverse phase
- Remote control via RS232
- Alarm by isolated relay contacts
- Remote off opto-coupled
- Optional railway version EN50155
- Fire and smoke: EN45545-2 approved
- Efficiency up to 93%
- The ODX-1300 are three-phase sinusoidal DC/AC inverters that offer 1300VA with multiple input-output combinations.
- All models have been designed to feed industrial equipment and are suitable for motor control and offer a version for railway applications that comply with EN50155.
- The ODX-1300 inverters have a maximum output current protection and feature a disable function for input under-voltage.
- Parameters can be monitored and adjusted through the PAMTool application via RS232 and the efficiency of this series goes up to 91%.
- The ODS-1500 is a series of single-phase sinusoidal DC/AC inverters that offer up to 1500W of active power with adjustable output voltage and frequency and input voltage range from 12Vdc to 110Vdc, allowing many possible input-output combinations.
- The output voltage can be monitored and adjusted along with other parameters via RS232 through an application available with all models.
- All ODS-1500 DC/AC inverters have been designed for industrial applications that require a robust and compact design and versions are available to comply with the EN50155 standard for rolling stock, with a tropicalized circuit and improved robustness.
- This inverter has been designed for chassis mounting and a rackmount kit is available as well. Cooling takes place through an internal fan and models offer up to 91% efficiency.
- The ODS-750 is a sine wave, single-phase DC/AC inverter. The series offers 450W-750W power and is available with 120Vac or 230Vac output and a wide range of input voltages (12, 24, 36, 48, 72, and 110Vdc).
- With a robust design, it fits in a wide range of industrial applications that require high reliability with a compact design. A version for railway applications is also available for all models, which comply with EN50155 and RIA12.
- The ODS-750 DC/AC has M3 threaded holes for chassis mounting in different positions, DIN rail or subrack mounting. The equipment is protected against reverse polarity, maximum average power and maximum peak current. It also shuts down when the operation curve limit is exceeded for over 1 second.
The OPS-260 inverter arrives to offer maximum performance with a high degree of protection (IP66). Safe and reliable, the new model complies with the IP66 normative protection in order to offer ruggerized resistance. The OPS-260 consists of sine-wave 120Vac or 230Vac output voltage DC/AC converters.
Main features:
- Sine wave output voltage
- 50-60Hz output frequency
- Convection cooling
- IP66 protection
- Output failure alarm
- Remote inhibit
- High input-output isolation 3000Vrms
- Railway version EN50155
- Fire and smoke: EN45545-2 approved
- OCS-260 inside
A High power Railway & Industrial 260VA DC/AC Inverter, the OCS-260 series is composed of sinusoidal inverters of up to 260VA apparent power and is presented in a very compact format. We have the rail version (EN50155) and offer multiple mounting options.
KEY FEATURES
-
Sine wave output voltage
-
Selectable output frequency: 50/60Hz
-
Adjustable output voltage
-
Output failure alarm
-
Remote inhibit
-
High input-output isolation 3000Vrms
-
Optional railway version EN50155
-
Fire and smoke: EN45545-2 approved
-
Efficiency up to 90%
ACB-3000 is a power transfer switch converter with 2 sine voltage input lines able to switch between the lines and give a secure output in case of failure in one of the input lines. The device has been designed to give extra protection against failure in one of the input lines for mainly auxiliary loads in railway and industrial applications.
Key Features:
-
Suitable for series: ODS-750, ODS-1500 and ODS-3000.
-
Available for both 120V and 230V versions
-
2ms high speed failure detection and transfer time, which goes unnoticed for the vast majority of AC loads.
-
Does not require a synchronised network.
Speak with a Product Expert.
